Understanding the word itself connectors are used in connecting two objects to join or fasten (two things together, or one thing with or to another). Corsolutions is one of the new company that built and design your prototype microfluidics devices that you need.
If you are looking for connectors why choose Corsolutions Connectors?
Rapidly established, user-friendly connections Connections are non-permanent Allows for tighter density of microchip ports Wide variety of fittings or adapters can be used As the approach does NOT use adhesion, fittings are reusable Connections are compatible with all substrate materials including PDMS, glass, silicon and plastics Connections remain leak-tight at greater than 500 psi Highly reproducible connections Can seal at any location on the surface or side of the device Top-side and back-side alignment Connections are lower dead-volume than conventional approaches Can be used for final performance assessment, and for chemistry treatment of devices during fabrication
How it Works Mount The connectors mount to a flat surface with either a screw (1/4-20 or M6) or a magnet.
End Attachment The end attachment portion of the connector is specific for a tubing or adapter size. This attachment is removable and can be easily exchanged. Please see below for example end attachments.
Compression Seal The connector makes a compression seal between a gasket, held by the connector arm, and the microdevice. The amount of compressive force applied can be adjusted. Depending on the microdevice substrate material, the compression seal can remain leak tight at greater than 500 psi. Watch the video below to understand more about the product.
If you are looking for connectors why choose Corsolutions Connectors?
Rapidly established, user-friendly connections Connections are non-permanent Allows for tighter density of microchip ports Wide variety of fittings or adapters can be used As the approach does NOT use adhesion, fittings are reusable Connections are compatible with all substrate materials including PDMS, glass, silicon and plastics Connections remain leak-tight at greater than 500 psi Highly reproducible connections Can seal at any location on the surface or side of the device Top-side and back-side alignment Connections are lower dead-volume than conventional approaches Can be used for final performance assessment, and for chemistry treatment of devices during fabrication
How it Works Mount The connectors mount to a flat surface with either a screw (1/4-20 or M6) or a magnet.
End Attachment The end attachment portion of the connector is specific for a tubing or adapter size. This attachment is removable and can be easily exchanged. Please see below for example end attachments.
Compression Seal The connector makes a compression seal between a gasket, held by the connector arm, and the microdevice. The amount of compressive force applied can be adjusted. Depending on the microdevice substrate material, the compression seal can remain leak tight at greater than 500 psi. Watch the video below to understand more about the product.
No comments:
Post a Comment